Mondolfo Ferro TBE160 TERRA Manual De Uso página 79

Solenoid valve blocked
➥ Clean or replace the solenoid valve
Transformer fuse broken
➥ Replace the fuse
Batteries run down (yellow LED on) (only in the radio versions)
➥ Charge the batteries
➥ Call the service centre
Pump broken
➥ Replace the pump
Worn connection joint
➥ Replace the joint
Not enough oil
➥ Top up the oil
Defective switch
➥ Replace the switch
When turning on the cold machine, quick translation does not work well.
➥ heat up the oil for a few minutes by moving the machine at a normal speed.
ATTENTION
If the by-pass coil or the stand-by func-
tion have problems, the wheel can still
be released from the turntable. Set the
switch (fig.38), which is normally set to
1, to pos. 0 (Stand-By off function). At this
point, the control unit motor will always be
running. Use a screwdriver on the by-pass
coil and then on the respective solenoid
valves (Fig. 38b) to make the machine
operate at emergency speed. In this way,
the locked wheel can be released. Then
contact technical assistance.
WARNING
The "Spare parts" handbook does not
authorise users to carry out work on the
machine with the exception of those
operations expressly described in the user
manual. It only enables users to provide the
technical assistance service with precise
information in order to minimise delays.
- E - Operator's manual
nGlISH
n
o hydrauliC preSSure
e
xCeSSive Control unit noiSe
J
erky MoveMentS
Fig. 38a
Fig. 38b
79