Dive In Gauge Mode - Seac GURU Manual Del Usuario

20 0
15
. m
Timer
2 35
:
TEMP m/min
°C 0.0
+20
C
Reset
Timer
20 0
15
. m
AVG Depth
15.2
TEMP m/min
°C 0.0
+20
C
Reset AVG
Depth
50 English

Dive in GAUGE mode

Compass
This manual does NOT replace adequate training!
B
The next diagram shows the information displayed when diving in gauge
GAUGE mode:
:25
Adequate training is required to use GURU in GAUGE mode.
In Gauge mode, GURU shows:
Current depth (at upper left): Expressed in meters or feet.
MAX
37.4
Run Time (at upper right): Time elapsed since the beginning of the dive.
D
Resettable timer (at center): Timer in mm:ss that can be reset by pressing
the
Move to
depth).
AVG Depth
AVG Depth (at center): Average depth, resettable by pressing the
Temperature (at lower left): Current temperature.
Ascent rate (at center bottom): Current ascent rate in m/min (or ft/min)
Maximum depth (at lower right): Maximum dive depth.
Compass
B
GURU also calculates tissue saturation and desaturation in GAUGE mode
GAUGE
using an imaginary MIX with a high content of inert gases (10/60, recorded
:25
in the LogBook). If after a dive in GAUGE mode you want to take a dive in OC
using the decompression calculations, GURU will consider the new dive to be
the next repetitive dive of the day.
Even if GURU performs the decompression calculations in the background,
MAX
37.4 they will not be displayed on screen, and they also have no effect in
GAUGE mode.
D
Move to
Timer
m WARNING!
m WARNING!
C button. Press the D button to move from Timer to AVG Depth (average
PLEASE NOTE
C
button.