Altimeter, Barometer, Thermometer - Seac GURU Manual Del Usuario

GURU
unlocked
B
12:30
95%
01/01 Th
54°
E S
NE SE
- - -
200m
990mb
+27°C

Altimeter, Barometer, Thermometer

Altimeter: (In the center, expressed in meters or feet) Indicates the altitude
above sea level.
The value of the height above sea level is calculated based on atmospheric
pressure.
54°
E S
NE SE
- - -
200m
+27°C 990mb
The accuracy of the altitude measurement depends directly on the
atmospheric pressure and humidity present in the sensor location.
Therefore, in the event of bad weather, or after a dive, the error could
be as much as +/-80m.
Thermometer: (At lower left, expressed in °C or °F): Indicates the
temperature of the GURU case.
The temperature measured by GURU is the temperature of the watch case
itself. Therefore, when worn on your wrist it will measure a temperature
higher than the outside temperature. To measure the ambient temperature,
App / exit
remove the watch from your wrist and wait at least 5-6 minutes. The
temperature reading will be accurate in the water after 3-4 minutes.
B
Barometer: (At lower right, expressed in millibars) Indicates the atmospheric
pressure (the pressure present at any point in earth's atmosphere).
The barometer reading is used to automatically adapt the decompression
calculation for dives at altitude. Therefore it isn't necessary to enter the
dive altitude in the settings (which the calculator would use to calculate a
hypothetical atmospheric pressure to use in adapting the decompression
calculation), because GURU automatically detects the true barometric
pressure regardless of the altitude.
m WARNING!
English 37