Dive Set 2 (Dive Settings 2) - Seac GURU Manual Del Usuario

GURU
unlocked
0.0
0
12:30 :00
95%
DIVE m/min
01/01 Th
0 0.0
D C
S.S. DPT:
S.S. TIME:
DEEP STOP:
LAST STP:
DECO CTRL:
EXIT
C
Next value
28 English

DIVE SET 2 (Dive settings 2)

The DIVE SET 2 Menu shows the second part of the
GURU dive settings.
S.S. DPT: (Safety Stop Depth) (3-9): Depth at which
you want to do your Safety Stop.
S.S. TIME: (Safety Stop Time) (OFF-9): Duration of
OC
the Safety Stop in minutes.
DIVE SET1
DIVE SET2
MIX
Although it is always recommended that you perform a Safety Stop for all
DEPTH
0.0
dives taken within the no-decompression limits, you can deactivate the Safety
C
Stop by setting the value S.S. Time to OFF).
DEEP STOP (OFF/STD): If enabled, this introduces an additional non-
obligatory stop with the Standard method (STD) (half of the maximum depth
for 2.5 minutes).
LAST STP: (Last Stop) (1-10): Depth at which you wish to take the last
decompression stop (only if the dive is outside the no-deco limit and requires
deco stops).
DECO CTRL: (ON/OFF): If enabled (ON), GURU will not permit any new
dives in the 12 hours following a dive in which any significant deco violations
B
occurred. Disabling (OFF) the DECO CTRL is not recommended, and will be
permanently recorded in the GURU Logbook.
3
+
5
OFF
3
ON
D
-
The Safety Stop is considered a NON obligatory stop to be taken during
dives within the no-deco limits. Violating the Safety Stop does not entail
decompression penalties for subsequent dives and is not considered a
"deco violation".
Therefore, DO NOT disable the DECO CTRL if you intend to skip the
Safety Stop.
The Safety Stop is omitted automatically if the decompression profile
falls outside the no-decompression limits. Even if any decompression
that may have been accumulated is cleared before the safety stop
depth, the dive is still not considered to be within the no-deco limits, and
thus GURU will not offer the Safety Stop.
m WARNING!
m WARNING!
Use only in
scuba mode