Seac GURU Manual Del Usuario página 41

5 9
OC
30
:15
. m
S F T
STOP NDL
3 5 99
: : :
%O2 MAX
21 37.4
19 2
OC
28
:15
. m
DEEP STOP NDL
2 15 10
: : :
%O2 MAX
21 30.4
20 2
OC
30
:15
. m
T TS DEEP STOP
6 19 2
: : :
%O2 MAX
21 38.4
{
This manual does NOT replace adequate training!
Safety Stop: In the event that a Safety Stop has been set (recommended),
it will be shown on the display in the center line of the computer during the
ascent, beginning at a depth of 9 m. (The safety stop is omitted automatically
when the dive exceeds the no-decompression limits).
You can change the time and depth of the safety stop in the DIVE SET 2
menu.
SFT: (Left) Time left to spend in the safety stop.
STOP: (Center) Depth of the stop.
NDL: (Right) No Decompression Limit.
If the Deep Stop is enabled: If you set the Deep Stop function, it will be
displayed 5 m before the actual depth required in the central line on the
display, and will be removed (if not performed) 5 m after the depth required.
{
If the Deep Stop is performed during a dive within the no-decompression
limits, the NDL time will remain visible on the right side of the display against
a black background.
The DEEP info is shown to the left in minutes. In the middle, STOP indicates
the depth.
{
If the Deep Stop is done in a dive with mandatory decompression stops, the
Deep Stop information will be shown against a neutral background in place
of the STOP and TIME values, leaving the TTS value visible against a black
background.
m WARNING!
English 41