Dive Set 1 (Dive Settings 1) - Seac GURU Manual Del Usuario

GURU
unlocked
0.0
OC
0
12:30 :00
95%
DIVE m/min DEPTH 01/01 Th
0 0.0 0.0
D C
WATER: SALT
UNITS: m/°C
MODE: FREE
P.SAFE:
EXIT
C
Confirm
value
26 English

DIVE SET 1 (Dive settings 1)

The DIVE SET 1 Menu displays the first part of the GURU dive settings.
WATER: (SALT/FRESH): Select the water type (SALT/FRESH).
Dive computers measure pressure and convert it to depth using water
density as a constant. Without the WATER adjustment, a depth of 10 m
DIVE SET1
DIVE SET2 in salt water is detected as 10.3 m in fresh water. Without the SALT/
MIX
FRESH setting, the depth reading could be distorted.
C
UNITS: Select the unit of measure you want to use:
m/°C = meters and degrees Celsius (date format dd/mm/yy).
ft/°F = feet and degrees Fahrenheit (date format mm/dd/yy).
MODE: Set the preferred dive type that GURU will activate upon entering
the water.
Always check that the dive type matches the dive actually being taken.
Change
value
SCUBA: GURU begins a dive in scuba mode with tanks.
B
GAUGE: GURU begins a dive in gauge mode with tanks.
FREE: GURU begins a dive in freedive mode.
If you should wish to use a different mode without changing the MODE
parameter, you can enter the desired mode by pressing the
from the watch screen and taking a dive deeper than 2 m. This way,
0
GURU will activate the mode that you selected without changing the
MODE value for that one dive.
D
For safety reasons, it is NOT possible to set FREE mode as the main
mode unless 12 hours have elapsed since the most recent SCUBA or
GAUGE dive. GURU automatically resets SCUBA mode if you attempt to
Change
force an exit with the main mode set to FREE.
value
NOTE
m WARNING!
NOTE
m WARNING!
D
button