Mix; Multimix Dives - Seac GURU Manual Del Usuario

GURU
unlocked
Select NEXT to set the various
MIXES

MIX 2

MIX:
PPO2
MOD:
DECO:
EXIT
C
Next value
30 English

Multimix Dives

You must have special training to dive with more
than one mix. If you have not received this training,
do not dive with more than one mix, and do not alter
these settings!
The GURU will display the TTX taking into account all
the active MIXES (DECO=YES) for the dive.
MIX: Indicates the oxygen % in the Mix.
PPO
intend to use the mix. (for GURU: 1.2-1.6;).
MOD: Maximum operating depth for the mix currently created. The MOD is
recalculated automatically every time the MIX, or ppO
MOD cannot be changed manually.
During the dive, an auditory alarm will be activated upon reaching the MOD
+
depth.
increase
DECO: Indicates whether or not the mix should be used during the dive.
B
If set to YES the device considers the change of mix at the depth indicated
by the MOD when calculating the decompression. If set to NO the Mix is
disabled.
50
1.60
MIX1 is always the starting mix.
22
The GURU automatically proposes a Gas change as soon as a gas that is
NO more suitable for decompression can be used considering the mix MOD,
regardless of the mix numbering.
NEXT
(See the section in this manual dedicated to the gas change during the dive.)
D
The GURU always offers the best available mix, during both the descent and
the ascent.
-
If you want to use the bottom gas during the descent as well, ignore the gas
decrease
change suggestion. The GURU will automatically adapt its decompression
calculations without requiring any intervention from the diver, and without
any penalty to the deco phase.
m WARNING!
: (Oxygen partial pressure): Indicates the maximum ppO
2
m WARNING!
Use only in
scuba mode
with which you
2
value, is modified. The
2