For Your Safety - Wurth Master WDM 201 Instrucciones Para El Manejo

WDM 201.book Seite 14 Dienstag, 18. November 2008 11:36 11
GB
Working
measuring tool is possible
only
instructions and the safety
notes are read completely and the instructions
contained therein are strictly followed. Save
these instructions and hand them over to other
persons before allowing them to operate the
device.
This measuring tool uses class 2 laser irradiation
in accordance with IEC 60825-1: 2007. This can
cause you or other persons to be unintentionally
blinded.
The device meets the requirements for electromag-
netic compatibility (EMC). Interference of other
equipment/devices within the vicinity of the Laser
Distance Meter is not excluded when these are not
sufficiently shielded against radio frequency sig-
nals. Observe the safety information of such
equipment/devices.
The symbols used have the following meaning:
DANGER:
Operational danger or improper usage that can
lead to serious personal injury or death.
CAUTION:
Operational danger or improper usage that can
lead to minor personal injury, but cause major
material damage, financial loss or environmental
damage.
Danger of blinding by the laser
beam.
Do not look into the laser beam and do
not aim the beam at other persons or ani-
mals.
DANGER:
Do not look into the laser beam and do not
unnecessarily aim the beam at other persons
or animals. The natural corneal reflex is not a
sufficient protective measure.
14

For Your Safety

safely with the
when the operating
Do not look into the laser beam with optical
aids, such as, e. g., binoculars. Optical aids
can focus the laser beam in a dangerous man-
ner for the eye.
Do not mistake laser viewing glasses with la-
ser protection glasses. They are used only for
better viewing of the laser beam in bright light.
Do not make the type plate on the device un-
recognisable. Missing information of the laser
class can lead to careless handling of the de-
vice on behalf of the user.
Keep the device out of the reach of children.
They can cause danger to themselves and to
others.
Never open the device yourself. The laser
beam is dangerous for the eyes. Have damag-
es repaired only through an authorized Würth
customer service agent.
CAUTION:
Do not aim the device into the sun. Aiming di-
rectly into the sun can cause damage to the
sensor.
Do not drop the device. The device can be-
come damaged and deliver incorrect meas-
ured values. Perform check measurements be-
fore carrying out important measuring tasks,
and inspect the function of the stops/rests. Pay
attention to cleanness of the laser optics.
Protect the device against moisture. Penetrat-
ing moisture damages the electronics. Always
store and transport the device in its protective
case.
Other optical equipment/devices can be sub-
ject to disturbance due to reflected diffused
light. Check if any other optical equipment/de-
vices are in the vicinity.
Use only original Würth accessories. Usage of
accessories that are not recommended can
lead to incorrect measured values.