Technical Data - Hughes & Kettner Black Spirit 200 FLOOR Manual De Instrucciones

8 Technical Data

Black Spirit 200 Floor
Max. power consumption
Mains input voltage
Mains voltage tolerance range
Ambient operating temperature range
Mains fuse (internal)
Input jack
Sensitivity (Clean, w/o Boost, all knobs at
12 o'clock, Master maxed)
Max. input level (without Boost)
FX Send jack
Nominal level (Clean, w/o Boost, all knobs
at 12 o'clock)
Max. Level
FX Return jack
Sensitivity (Clean, w/o Boost, all knobs at
12 o'clock)
Sensitivity (Clean, w/o Boost, all knobs at
12 o'clock, Master maxed)
Max. input level
Aux In mini jack
Sensitivity (Master at 12 o'clock)
Sensitivity (Master maxed)
Max. input level
Monitor In
Sensitivity (Master and Level knobs at 12
o'clock)
Sensitivity (Master and Level knobs maxed)
Max. input (+/- Level all the way down)
Phones/Line jack
Nominal level (Clean, w/o Boost, all knobs
at 12 o'clock)
Nominal level (Clean, w/o Boost, all knobs
at 12 o'clock, Master maxed)
Max. level
Red Box AE+ Out
Max. level
Speaker Out jack
Power output
MIDI In
MIDI Out/Thru
Dimensions (W x H x D)
Weight
300 W
100 – 240 V, 50 – 60 Hz
+/–10%
0° to +35° C
T 4 A (not user serviceable)
6.3 mm (1/4"), unbalanced, 1 MOhms
–16 dBV
0 dBV
6.3 mm (1/4"), unbalanced, 220 Ohms
–10 dBV
+5 dBV
6.3 mm (1/4"), unbalanced, 20 kOhms
+1 dBV
–13 dBV
+7 dBV
3.5 mm stereo, 20 kOhms
0 dBV
–16 dBV
+6 dBV
XLR, balanced, 10 kOhm
0 dBV
–20 dBV
+30 dB
6.3 mm (1/4") stereo, 50 Ohms
–9 dBV
+6 dBV
+13 dBV
XLR, balanced, 1240 Ohms
+10 dBV
6.3 mm (1/4"), bridged mode, mono,
8-16 Ohms
200 watts
7-pin, 20 V DC phantom power (150 mA),
5-pin compatible
5-pin
450 x 70 x 255 mm
4.1 kg / 8.9 lbs
Apple, the Apple logo and iPad are trademarks of Apple Inc., registered in the U.S.
and other countries. App Store is a service mark of Apple Inc.
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by Stamer Musikanlagen GmbH is
under license.
All mentioned trademarks and copyrights belong to their respective owners.
For the USA:
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. End users must follow the specific operating instructions
for satisfying RF exposure compliance. This transmitter meets both portable and
mobile limits as demonstrated in the RF Exposure Analysis. This transmitter must
not be co-located or operating in conjunction with any other antenna or transmitter
except in accordance with FCC multi-transmitter product procedures.
For Canada:
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
Under Industry Canada regulations, this radio transmitter may only operate using
an antenna of a type and maximum (or lesser) gain approved for the transmitter by
Industry Canada. To reduce potential radio interference to other users, the antenna
type and its gain should be so chosen that the equivalent isotropically radiated
power (e.i.r.p.) is not more than that necessary for successful communication.
Black Spirit 200 Floor – Manual 1.0
13