Troubleshooting - Philips Respironics SimplyGo Mini Manual De Instrucciones

SimplyGo Mini User Manual

Troubleshooting

The table below lists common problems and actions you can take� If you
are unable to resolve a problem after referring to this table or to the "Alarm
Indicators and Screen Symbols" section, please contact your home care
provider�
Problem
Device Won't
Turn On
Device Will Not
Trigger A Pulse
Of Oxygen
Oxygen
Not At Full
Concentration
Alarm Occurs
44
Possible Cause
Battery is depleted�
Battery is not
installed correctly�
Power button not
pressed twice�
SimplyGo Mini is
not turned on�
Cannula tubing is
kinked or twisted�
Device malfunction� Contact your equipment
Device is warming
up�
The device needs
your attention�
What You Should Do
Use the AC or DC power cords
to operate the device (with the
battery inserted) to recharge the
battery� If this does not resolve
the problem, contact your
equipment provider�
Remove the battery and
re-install it correctly�
Press the power button twice�
Press the power button twice�
Make sure the tubing is
connected properly to the
oxygen outlet port and that it is
free of any obstruction�
provider�
Continue using your device, and
wait 20 minutes for the device to
deliver oxygen at the prescribed
concentration� If the condition
persists, contact your equipment
provider�
See the Alarm Indicators and
Screen Symbols section for
information about specific
alarms and what you should do�