Tv-Out; Update Firmware; Speaker; Auto Power Off - RIDGID micro CA-300 Manual Del Operario

micro CA-300 Inspection Camera

TV-Out

Select the "NTSC" or "PAL" to enable the TV-
Out for the video format required. Screen will
go black and image will be transmitted to exter-
nal screen. To get live image on unit, hit Power
button to disable function.

Update Firmware

Select Update Firmware to install the latest
version of software on the unit. Software will
have to be loaded onto a SD™ Card and
inserted in to the unit. Updates can be found
at www.RIDGID.com.

Speaker

Select the Speaker icon in the menu and press
Select . Select ON or OFF with up/down
button to keep the speaker ON or OFF dur-
ing video playback.

Auto Power Off

Select the Auto Power Off icon and press se-
lect . Select disable to turn OFF the auto -
ma tic shut down function. Select the 5 Minutes,
15 Minutes or 60 Minutes to turn OFF the
tool upon 5/15/60 minutes of non-operation.
Automatic shut down setting will not be acti-
vated when recording or playing video.

Factory Reset

Select the Reset icon and press Select
Confirm the reset function by selecting Yes
and press Select
tool to the factory set up.

About

Select the About function to display the firm -
ware revision of the micro CA-300 as well as
the software copyright information.
Transferring Images to a
Computer
With the unit powered ON, connect the micro
CA-300 to a computer using the USB cable.
The USB connected screen is displayed on the
micro CA-300. The internal memory and SD™
card (if applicable) will appear as separate
drives on the computer and are now accessi-
ble as a standard USB storage device. The
copy and delete options are available from
computer operation.
12
again. This will reset the

Connecting to TV

The micro CA-300 Inspection Camera can
be connected to a television or other monitor
for remote viewing or recording through the in-
cluded RCA cable.
Open the right side port cover (Figure 3) .
Insert the RCA cable into the TV-Out jack.
Insert the other end of the cable into the Video-
In jack on the television or monitor. Check to
make sure the video format (NTSC or PAL)
output is set properly. The television or mon-
itor may need to be set to the proper input to
allow viewing. Select the appropriate TV-Out
format using the menu.
Use with SeeSnake

Inspection Equipment

The micro CA-300 Inspection Camera can
also be used with various SeeSnake Inspec -
tion Equipment and is specifically designed to
be used with the microReel, microDrain™
and the nanoReel Inspection Systems. When
used with these types of equipment, it retains
all of the functionality described in this manual.
The micro CA-300 Inspection Camera can
also be used with other SeeSnake Inspection
Equipment for viewing and recording only.
For use with SeeSnake Inspection Equip -
ment, the imager head and any cable exten-
sions must be removed. For the microReel,
microDrain™, nanoReel and similar equip-
.
ment, see the operator's manual for informa-
tion on proper connection and use. For other
SeeSnake Inspection Equipment (typically a
reel and monitor), an adapter must be used to
connect the micro CA-300 Inspection Camer -
a to a Video-Out port on the SeeSnake Inspec -
tion Equipment. When connected in this man-
ner, the micro CA-300 Inspection Camera
will display the camera view and can be used
for recording.
When connecting to SeeSnake Inspection
Equipment (microReel, microDrain™, or nano -
Reel), align the interconnect module con-
nected to your reel with the cable connector on
the micro CA-300 Inspection Camera, and
slide it straight in, seating it squarely. (See
Figure 19)
®