After Use; Cleaning; Replacing The Outer Foil And The Inner Blade - Panasonic ES-WS24 Instrucciones De Operación

Shaver head
ES-WS24
Before shaving, wipe dry any moisture or sweat from the skin.
1
1
Attach the shaver head [
• Confirm the bikini comb [
2
2
Check that the outer foil is not deformed or
damaged.
3
3
Slide the switch [
F
(normal speed) position and carry out shaving.
• Press gently so that the whole blade is in close contact
with the skin and the surface of the blade does not
move up and down.

After use

1. Slide the switch ( ) to the 0 position.
F
2. Remove the AC adaptor from the household outlet, and
remove the appliance plug from the main body.

Cleaning

• Always clean the heads and caps after use to keep them in a
hygienic state.
• Switch off and unplug the appliance before cleaning.
• Take care not to damage the skin protector, the frame, the
fast cap and the gentle cap during cleaning.
1. Lift fast/gentle caps upward
while holding the frame
release ribs [ A B 2] or remove
the frame by pushing the
frame release button [
14
].
E
] is detached.
D
] to the 1 (low speed) or 2

E
].
2. Clean the gentle cap [
epilation head for legs/arms
[ C ] and the shaver head [
with the cleaning brush [
Replacing the outer foil and the inner
blade
ES-WS24
We recommend replacing the outer foil [
9] every two years. Remove the outer foil
the inner blade [ E
of the shaver head [ ] only when replacing it.
E
Replacing the outer foil
1. While pushing the outer foil gently with the fingers, use
a fingernail to release the plastic panel ( ) on the blade
from the hooks ( ) on the inside of the frame.
2. The new outer foil should be slightly bent and pushed
in until it is hooked in the frame.
1
Replacing the inner blade
1. Remove the inner blade by holding it
at both ends and pulling straight away
from the shaver.
2. Insert the inner blade by holding it at
both ends and press downward.
], the
B
E ]
].
H
E 5] every year and
2