Deltafox DG-ESS 2844B Traducción Del Manual De Instrucciones Original página 27

erwise hinder proper ejection
and force the material back up
through the feeder.
• Do not transport or tip the
shredder with the motor run-
ning.
• Keep hands, other body parts
and clothing out of the filling
chamber and ejection channel
and away from other moving
parts.
• In the event of blockages in
the machine intake or ejection,
switch off the motor and dis-
connect the machine from the
mains before removing leftover
material in the intake opening
or ejection channel. Ensure
that the motor is free of rub-
bish and other accumulations
in order to safeguard the motor
from damage or possible fire.
Remember that the cutting
tool is also activated when the
starting mechanism is started
on a motor operated machine.
CAUTION! The following
states how damage to the
trimmer and possible injury
to people can be avoided:
• Handle the unit with care.
Clean the ventilation slits regu-
larly; keep to the maintenance
instructions.
• Do not overload your device.
Work only within the indicated
range of performance. Do not
employ any low power ma-
chines for heavy work. Do not
use your device for purposes
for which it has not been de-
signed.
• Only switch the shredder off
once the funnel feeder is com-
pletely empty since the shred-
der may otherwise clog up and
not be able to start afterwards.
• Do not attempt to repair the
shredder yourself unless you
are qualified to do so. Any
work not specified in this man-
ual may only be carried out by
our service centre.
Electrical safety
CAUTION! The following
states how to avoid ac-
cidents and injuries due to
electric shock:
• Use the tension relief provided
for the fixing of the extension
cord.
• Damaged cables, coupling and
plugs or connecting leads not
corresponding to specifica-
tions, must not be employed.
Remove the plug immediately
from the plug socket in case of
damage to the mains cable.
Do not touch the mains power
supply cable under any cir-
cumstances until you have
pulled the plug out of the
mains socket.
• If the power cable for this equip-
ment is damaged, it must be
replaced by the manufacturer,
a customer service agent of the
same or a similarly qualified per-
son in order to prevent hazards.
• Do not use the appliance if the
on/off switch does not work
properly. Always have a dam-
aged switch repaired by our
GB
27