Kit Purpose
This kit is provided for installing an SX-A/DPS-A conversion kit on older 3.0L, 4.3L, 5.0L, 5.7L and 8.1L engines.
Affected Models
This kit applies to all SX-A and DPS-A model sterndrives.
Kit Contents (PN 3847657, PN 3889597, PN 3847733)
Part No.
Item #
3889598
1
1
3889600
2
945912
3
3853620
4
3853620
5
3853620
6
3889961
2
7
3888684
8
3841847
2
9
3853916
10
3863450
11
3863442
12
1. Entire cable harness not shown. Only individual components are shown in illustrations.
2. Not shown in illustrations.
Tools Needed
•
Socket Set
•
Socket Extension
•
Triple Guard Lube 11606
NOTE! For some applications, you must drill two additional holes when mounting the transom shield. Please use
the transom cutout template (included in the transom shield kit) for drilling the holes. For additional instruc-
tions, please refer to the SX-A/DPS-A Installation Manual.
NOTE! To complete the installation of this kit, you may need to purchase the following hose: PN 3817582 for 3.0
and PN 3817579 for all other engines.
CAUTION! Be sure to use new clamps provided in these kits; discard old clamps. Failure to use
new clamps may cause damage to the bellows, leading to component damage.
CAUTION! The static water line height must be tested before the engine is started for the first time.
This will prevent the ingestion of water into the engine and resultant damage.
2
Description
Cable Harness - Adaptor for trim sender and pump
Bracket - Mount for cable harness
Screw - Bracket mount to boat
Screw - Circuit breaker to bracket
Screw - Relay holder to bracket
Screw - Fuse holder to bracket
Exhaust Y-pipe - 3.0L engines (Kit No. 3847657)
Exhaust Y-pipe - 4.3L, 5.0L, 5.7L engines (Kit No. 3889597)
Exhaust Y-pipe - 8.1L engines (Kit No. 3847733)
Kit - Exhaust pipe hardware
2
Exhaust bellows
Clamp - Exhaust bellows to Y-pipe
•
SX-A/DPS-A Installation Manual
•
SX-A/DPS-A Transom Template
•
Hose (PN 3817582 for 3.0 and PN 3817579 for
all other engines)
Qty
1
1
8
2
2
1
1
1
1
1
2
4
VPA 7746918 01-2007