Ups Setup And Configuration; Setup Menu - Tripp-Lite SmartOnline SUINT1000XLCD El Manual Del Propietario

6. UPS Setup and Configuration

6.1 Setup Menu

Press the scrolling button
Note: Only qualified service personnel may perform setup actions. During setup, the following items can be adjusted:
1. Inverter voltage
2. Inverter frequency
3. Frequency converter
4. Bypass range
5. Economy mode
6. Alarm disable
7. Overload alarm
For setup procedures, refer to the following:
1. Press the scrolling button
2. Press the scrolling button
3. Press the confirmation button
4. You can skip to the next setup item by pressing the cancel button
5. In setup, press the scrolling button
6. In setup, if no button is pressed for more than 2 minutes, the LCD will exit from the setup menu and return to the original
display.
This UPS supports a variety of advanced configuration options that can be accessed via the front panel LCD screen.
Configuration and information items include Inverter Voltage, Inverter Frequency, Frequency Conversion, Bypass Range,
Economy Mode, Alarm Setup and Overload Alarm Setup. Some settings cannot be changed in certain operation modes. Refer
to the table below for details:
Setup Item
Inverter Voltage
Inverter Frequency
Frequency Converter
Bypass Range
Economy Mode
Alarm Disable
Overload Alarm
Note: Only qualified service personnel may perform setup actions.
for more than 3 seconds to enter the setup menu.
for more than 3 seconds to enter the setup menu.
for 0.1 second to change the parameter.
for 0.1 second to confirm your parameter.
for more than 3 seconds. The LCD will go to the original display.
Standby Mode
Yes
Yes
Yes
Yes
Yes
Yes
Yes
for 0.1 second.
On-line Mode
No
No
No
Yes
Yes
Yes
Yes
14
Bypass Mode
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Battery Mode
No
No
No
Yes
Yes
Yes
Yes