Troubleshooting Guide; Tape Playback - Sony XR-3500MK2 Manual De Instrucciones

Troubleshooting Guide

The following checklist will assist in the correction of most problems which you may encounter with
your unit.
Before going through the checklist below, refer to the connection and operating procedures.
General
Problem
No sound
Indications do not appear in the
display window.

Tape playback

Problem
Playback sound is distorted.
EN
Radio reception
Problem
Preset tuning is not possible.
Automatic tuning is not possible.
The "ST" indication flashes.
12
Actual total number:
Cause/Solution
• Adjust the volume with the
• Set the fader control to the center position for 2-speaker
systems.
Remove the front panel and clean the connectors. See "Cleaning
the Connectors" of "Maintenance" for details.
Cause/Solution
Contamination of the tape head. n Clean the head.
Cause/Solution
• Memorize the correct frequency.
• The broadcast is too weak.
The broadcast is too weak. n Use the manual tuning.
• Tune in precisely.
• The broadcast is too weak. n Press the SENS button to enter
the MONO mode.
Sony XR-3500MK2 (E,S,P,C) 3-858-231-21 (1)
+
button.