Setting Up The Tv With Your Pc - Samsung 3 Serie Manual Del Usuario

Reset (OK / Cancel)
Resets your current picture mode to it's default settings.

setting up the TV with your PC

¦
Set the input source to PC.
Auto Adjustment
t
O
MEnU m →Picture → Auto Adjustment →
EnTERE
Adjust frequency values/positions and fine tune the settings
automatically.
✎
Not available when connecting through HDMI/DVI
cable.
screen
Coarse / Fine : Removes or reduces picture noise. If the
■
noise is not removed by Fine-tuning alone, then adjust
the frequency as best as possible (Coarse) and Fine-
tune again. After the noise has been reduced, readjust
the picture so that it is aligned to the center of screen.
PC Position : Adjust the PC's screen positioning if it
■
does not fit the TV screen. Press the ▲ or ▼ button to
adjust the Vertical-Position. Press the ◄ or ► button to
adjust the Horizontal-Position.
Image Reset : Resets the image to default settings.
■
Using Your TV as a Computer (PC) Display
Setting Up Your PC Software (Based on Windows XP)
Depending on the version of Windows and the video card,
the actual screens on your PC may differ in which case the
same basic set-up information will almost always be applied.
(If not, contact your computer manufacturer or Samsung
Dealer.)
1. Click on "Control Panel" on the Windows start menu.
2. Click on "Appearance and Themes" in the "Control
Panel" window and a display dialog-box will appear.
3. Click on "Display" and a display dialog box will appear.
4. Navigate to the "Settings" tab on the display dialog-box.
The correct size setting (resolution) [Optimum: 1360 x
y
768 pixels]
If a vertical-frequency option exists on your display
y
settings dialog box, the correct value is '60' or '60 Hz'.
Otherwise, just click 'OK' and exit the dialog box.
15
English