Optimum Operating Environment - Samsung RF31FMESBSL Guia De Inicio Rapido

6. Optimum Operating Environment

Item
[Water temperature]
"It is recommended that
you only drink sparkling
water after sufficiently
cooling it."
[CO concentration of
2
sparkling water 1]
"To ensure a precise
CO concentration, it is
2
helpful to dispense all
the remaining sparkling
water before producing
sparkling water."
[CO concentration of
2
sparkling water 2]
"To maintain a precise
CO concentration of
2
sparkling water, replace
the CO cylinder before
2
it is depleted."
DA68-02942A-05.indb 12
Descriptions
• Since the temperature of the sparkling water greatly affects the
taste of the water, if the temperature of water is not sufficiently low,
you may not be able to get the right taste of the sparkling water.
• It is generally recommended dispensing sparkling water by pressing
and holding the "Sparkling Water" button for 3 seconds to reset the
cylinder and start producing sparkling water at least 4 hours after
connecting the tap water.
• Additionally, when you produce sparkling water, it is recommended
producing sparkling water without dispensing too much Still Water
so that sparkling water is produced with cold water.
• If you drink 0.5 gallons (2 liters) or more a day, the water may not
be cooled sufficiently.
• After producing sparkling water, it is recommended putting the
sparkling water in an air-tight container and keeping it cold for
better taste.
• Since the current system does not produce sparkling water by
considering the CO gas in the remaining sparkling water in the
2
sparkling water tank, even if you've changed the concentration
level, the resulting concentration may differ depending on the
remaining sparkling water in the sparkling water tank.
• If you haven't used the sparkling water function for an extended
period of time (one week or longer), it is helpful to first remove all
the sparkling water and then re-produce sparkling water in order to
improve the quality of the sparkling water.
• On the contrary, if you want a higher CO
water (higher than level 3),you can increase the concentration by
pressing and holding the "Sparkling Water" button for 3 seconds to
reset the cylinder and start the sparkling water production.
• If the time when to replace the CO
CO concentration decreases and the water extraction becomes
2
weaker.
English - 12
concentration of sparkling
2
cylinder comes closer, the
2
2018. 7. 31. 2:35