Samsung RF31FMESBSL Guia De Inicio Rapido página 10

1. Check if the numbers (
indicates that the sparkling water tank is being emptied and sparkling water is being produced.
When the production is complete, you can enjoy drinking sparkling water.
2. If there is no blinking icon on the display panel, check if the (
sparkling water icon.
This indicates that the sparkling water tank is empty but the automatic sparkling water
production function is turned off so that sparkling water is not being produced. To produce
sparkling water, press and hold the "Sparkling Water" button for 3 seconds to reset the cylinder
and start the production.
(8) "I pressed the "Sparkling Off" button but sparkling water continues to be dispensed."
[Sparkling Off vs. Sparkling Water]
1. Even if you press the Sparkling Off button, sparkling water is dispensed for as long as there is
sparkling water in the sparkling water tank.
2. If you do not use the sparkling water maker for an extended period of time, stop the automatic
sparkling water production function and remove the sparkling water through the dispenser.
(9) "Not enough water is entering..." [ Water supply]
1. Please check if the tap water faucet or valve is closed or the hose is bent and that water is
supplied normally. If the tap water pressure is too low, the sparkling water maker may not work
properly as there is insufficient water supply to the sparkling water tank.
2. When the water is supplied to the sparking water tank from a water purifier, sparkling water
may not be produced properly because too much water is required for a short period of time.
It is recommended not dispensing water from a water purifier while starting to make sparkling
water. (up to 5 minutes)
3. If the problem continues, please contact the water purifier manufacturer or ask a plumber to
increase the tap water pressure to a normal level.
(10) "The sparkling water is not cold enough and tastes flat...."
[ Sparkling Water Taste and Temperature Management]
1. If you continuously produce a lot of sparkling water, you may not be able to enjoy the true taste
of sparkling water because there is too little time to cool the water. To drink sparkling water at
its optimal state, you have to ensure sufficient cooling time when you dispense sparkling water.
2. It is recommended dispensing sparkling water at least 4 hours after connecting the tap water to
the refrigerator.
(11) "I pressed the Sparkling Off button but the sparkling water maker is not turned off."
[ Turning off the function while producing]
1. Check if the numbers (
indicates that sparkling water is being produced and cannot be stopped immediately.
However, if you press and hold the "Sparkling Off" button for 3 seconds during the production,
then the OFF icon over the Sparkling icon will be activated and it will stop the auto sparkling
water making operation from next time on.
DA68-02942A-05.indb 10
) next to the sparkling water icon are blinking. If they are blinking, it
) next to the sparkling water icon are blinking. If they are blinking, it
English - 10
) icon is displayed over the
2018. 7. 31. 2:35