Tabla de contenido
REASSEMBLY
1. The slicer has a lift lever that raises it to allow cleaning underneath.
a. With the auto engage lever in the "Manual" position push the chute
arm to the back of the slicer.
b. Pull the lift lever knob towards you with your right hand while gently
lifting up on the slice thickness dial with the other (Fig. 12-1).
c. Pull the lift lever towards you until it stops (Fig. 12-2).
Hold the lift lever with one hand while you clean the counter
area under the slicer.
2. After cleaning the counter area under the slicer gently lower the slicer
back to its operating position. Make sure the slicer feet are in the foot
retainers.
3. Retrieve the cleaned, sanitized, and dried food chute from the sink
area and place it back onto the chute arm. Securely tighten the food
chute release knob.
4. Plug the slicer in.
Page 12
CLEANING
Figure 12-1
Figure 12-2
Tabla de contenido
