Working With The Food Processor - Silvercrest KM 250 B1 Instrucciones De Uso

5) Start chopping by pressing the ON button
Press OFF/PULSE button
ingredients have been chopped and you want
to stop the appliance.
If you would like to continue to process the
ingredients using the PULSE function, press
the OFF/PULSE button
succession until the ingredients are sufficiently
chopped.
If ingredients stick to the sides of the bowl
blades:
–
Switch the appliance off.
–
Remove the lid
–
Remove the ingredients from the cutting
blades and the inside using a dough
scraper or a spoon.
–
Close the lid
–
Restart the appliance.
NOTE
► Only process meat that is boneless!
► Do not allow the appliance to operate for
long periods when chopping (hard) cheese.
Otherwise the cheese will become too hot,
start to melt and clump.
► If you wish to add ingredients during the cut-
ting process, add them via the feed tube
The appliance stops if the lid
Do not exceed the maximum quantities speci-
fied in the table when adding ingredients!
KM 250 B1
once when all the
several times in
.
.
is opened!
.

Working with the food processor

You can grate or slice food using the processor's
attachments
1) Select the required attachment and assemble
everything as described in the chapter "Assem-
bling the appliance".
2) Remove the pusher
3) Cut the food into pieces that will easily fit into
the feed tube
4) Start grating/slicing by pressing the ON
or the
button
5) Then gradually add the food. Push the food in
using the pusher
Do not exceed the quantities specified in the follow-
ing table.
INGREDIENT
Apples/carrots
Cucumber
Potatoes
Onions
INGREDIENT
!
Apples/carrots
Parmesan
Potatoes
Hard cheese (e.g.
mature Gouda)
/ .
from the feed tube
.
.
without applying pressure.
SLICER ATTACHMENT
max. 350 g
max. 1.5
max. 350 g
max. 200 g
GRATER ATTACHMENT
max. 350 g
max. 150 g
max. 350 g
max. 200 g
GB │ IE
.
│ 17 ■