Brush Speed Selector; Brush Indicator - Hoover Brush 'N' Wash Manual Del Usuario

19
The cleaner may also be lifted by
19
placing a hand under the upper
clean solution tank handle as shown.
22
C
To clean screen (C), turn cleaner off
and unplug from electrical socket.
22
Remove clear cover and wipe off screen
with a damp cloth. Snap cover back into
position.
20

Brush speed selector

Your cleaner has three agitator
20
Hl - for normal cleaning of carpet and
brush settings.
LO - for gentle cleaning of carpets and
bare floors
OFF - for cleaning carpets and bare
bare floors
floors when brushing is not desired.
(Such as when picking up liquid spills.
See page 10.)
Slide selector button to the desired set-
ting before cleaning.
23
The tanks
Clean solution tank
(upper tank)
The clean solution tank holds the
23
cleaning solution that is to be dis-
persed onto the surface to be cleaned.
Unplug cleaner from electrical socket.
How to fill
Place cleaner handle in the upright,
locked position.
To remove tank, press down on handle
(A) and pull forward.
A
21
B

Brush indicator

The brush indicator will spin (A)
21
when the cleaner is turned ON
If the indicator does not spin and the
and the brushes are rotating.
pattern is visible (B) w w h h e e n n t t h h e e c c l l e e a a n n e e r r
i i s s t t u u r r n n e e d d O O N N , , the brushes are not
rotating.
There are three reasons why the brushes
may not be rotating:
1. Brush speed selector set on OFF (see
previous section).
2. Solution tube connected (page 12).
3. Brush indicator screen dirty.
24
A
Carry tank to a sink.
24
Rotate tank cap counterclock-
wise and lift up to remove cap.
7