Tabla de contenido
Idiomas disponibles
Idiomas disponibles
3401 Control Panel Functions
Wind Speed Knob
[
]
Cooling Mode
To operate in the cooling mode, you must add water before operating the Cooler;
Note :
to enhance the cooling effect, add ice cubes after adding water to increase the effect.
Turn the Cooling Knob from 0 to 1 (0 is off, 1 is on) to activate the "evaporative cooling" function.
After the water pump starts running, the honeycomb cooling filter will be completely moist and you
will feel the cool air.
[
]
Wind Speed Knob
Connect the power and turn the middle wind speed knob to
activate the Cooler; turn the wind speed in the 0 to 1 direction
to select fan speed. (1 for Low, 2 for Medium and 3 for High)
To shut off the Cooler, please turn the wind speed knob to the
0 position, and turn off the power switch.
[Swing Knob]
The louver blades are preset to automatically move in the left-and-right direction.
To change the up-or-down wind direction, manually adjust the blades in front of
the cooling fan to the desired direction.
3400/3401 Operation Introduction
[Caution]
Please ensure that the water cooling fan is properly positioned prior to installing and
starting the product. Connect the hose to a "Continuous Water Supply" to allow
uninterrupted operation and to avoid having to manually add water. If the Cooler is
operating with an inadequate supply of water, this may cause water pump failure.
Please be sure to unplug the power before refilling or emptying the water tank.
Note :
[Secure the Brake]
To secure the Cooler, please push down the safety lever of the Front Brake Caster (I);
to move the Cooler, please pull up the safety lever.
Cooling Mode
Wind Speed Knob
Swing Knob
14
I
Capítulos
Tabla de contenido
