Maintenance Regulations - geberit Mapress ZB 323 Instrucciones De Servicio

Maintenance

Maintenance regulations

Pressing tools and pressing attachments that are not maintained, or are not
professionally maintained, can cause serious accidents. It is essential to observe
the maintenance intervals and maintenance work outlined below.
Interval
Regularly (before use,
at the start of the
working day)
After 3000 pressing
operations or after one
year at the latest in
accordance with the
information on the test
badge
B1280-001 © 03-2016
967.040.00.0 (00)
Maintenance work
Pressing collar and adapter jaw:
• Check the pressing collar and adapter jaw for
externally visible defects, such as damage, material
cracks and other signs of wear. If defects are present,
replace the pressing collar and adapter jaw or have
the defects repaired by an authorised repair shop
• Spray the complete pressing collar and adapter jaw,
particularly the pressing contour, with BRUNOX®
Turbo-Spray® or an equivalent lubricant
Pressing collar:
• Remove deposits in the pressing contour
• Clean the pressing contour with a cloth soaked in
solvent
• Spray the pressing contour and joints with BRUNOX®
Turbo-Spray® or an equivalent lubricant
Adapter jaw:
• Examine whether the jaw levers can move easily. If
necessary, spray the jaw lever with BRUNOX® Turbo-
Spray® or an equivalent lubricant
• Have the state of wear of the pressing collar and the
adapter jaw checked by an authorised repair shop
EN
29