Promax MZ-505C Manual De Instrucciones página 64

5. Hi/Lo Limits Settings:
Press
previous setting Hi will also appear and let user to do the
modifications. When you input Lo setting value, the
annunciator "
also appear and let user to do the modifications.
When the Lo setting value is greater than the Hi setting
value, the LCD shows Err and back to the Hi setting mode.
Please to enter the new Hi/Lo setting value.
6. TOL Hi/Lo Limits Setting:
Press
setting standard value will also appear and let user to do the
modifications. When you in out + TOL setting value, the
annunciators "TOL" "
+ TOL will also appear and let user to do the modifications.
When you input — TOL setting value, the annunciators "TOL"
" " are flashing. The previous setting — TOL will also
appear and let user to do the modifications.
7. REL Setting:
Press
setting value ell also appear and let user to do the
modifications.
Page 22
[12], LCD only shows "
" is flashing. The previous setting Lo will
[13], LCD shows TOL flashing. The previous
" are flashing. The previous setting
, LCD shows D flashing. The previous standard
INSTRUCTION MANUAL. MZ-505C
" flashing. The
04/2015