Automatic Fuse Status Detection - Promax MZ-505C Manual De Instrucciones

INSTRUCTION MANUAL. MZ-505C
There are 4 preset values in the TOL mode for instant use, just
to press [13] again to cycle through 1%, 5%, 10%, 20% then
back to the present. When entering the TOL mode, and the
enunciator " " "
exceeds Hi limits, the "
tone. When the Input goes below LO limits, the "
the beeper emits a pulse tone. This warns users that out of setting
ranges.
The standard value can be set by SET function, press refer to
SET setting in this manual. When standard value have set, and
press [13]then press
In additions, the meter will ignore and not to record if overload
("OL") situation happens in the comparative processes or in the
capacitance range 50 counts. Press
function.

4.13 Automatic fuse status detection

When the meter detects that the protective fuse is open, the
FUSE
" " character will appear and an internal beep will sound
continuously. In this situation, none of the function keys can be
operated and all other meter functions will be discontinued. Fuse
replacement is required.
04/2015
" will appear in the same time, when the input
" is blinking and also emits a continuous
[11] to use preset TOL setting.
" is blinking and
[13] 2 sec to exit this
Page 25