Tabla de contenido
Idiomas disponibles
Idiomas disponibles
INSTRUCTION MANUAL. MZ-505C
4.9 SET
1. The
not used any other functions.
2. Press
manual range mode automatically.
3. While in the SET function, the main display is cleared, the
second display shows "SET" annunciators, LCD shows, ^,
TOL, ^,^ flashing. There are only 5 keys that you can use
[2],
moment.
4. OPEN, SHORT calibration:
Press
[7] (ENTER), the program enters "OPEN" calibration,
after completing the open. The LCD displays CAL, Shrt,
press
do not want to proceed Short Calibration, and press
[11], to exit. When LCD shows
(ENTER) key. The program enters "SHORT" calibration. And
then back to normal situation.
04/2015
[11] can only be activated only before you have
[11] to enter the SET mode, and change to
[11],
[11], LCD will display
[7]. The program enters Short calibration. If you
[5],
[12],
CAL open
CAL Shrt
, press
[13] in this
, and press
[7]
Page 21
Capítulos
Tabla de contenido
