Safety Rules - Promax MZ-505C Manual De Instrucciones

INSTRUCTION MANUAL. MZ-505C

2 SAFETY RULES

*
The safety could not be assured if the instructions for use
are not closely followed.
*
When measuring components in circuit you must previously
disconnect the power supply.
*
When measuring capacitors is necessary to discharge them
previously.
*
When using some of the following accessories use only the
specified ones to ensure safety:
Battery 9V 6F22.
*
Observer
measurement.
*
Use this instrument under the specified environmental
conditions.
*
Remember that voltages higher than 70 V DC or 33 V AC rms
are dangerous.
*
The user is only authorised to carry out the following
maintenance operations:
Replace the battery.
Fuse replacement
On the Maintenance paragraph the proper instructions are given.
Any other change on the equipment should be carried out by
qualified personnel.
04/2015
all specified ratings both of supply and
Page 7