Maintenance
Figure 3
Back
Ledge
Rear
Side Section
Tab
Figure 4
located at the bottom of
the partially reflective glass
(Figure 3).
! NOTE: Log set fits tightly
into firebox, some force may be
necessary to remove.
4. Set logset in front of firebox.
5. Disconnect the logset LED
wire harness from unit
(Figure 4).
6. Examine the bulbs to
determine which bulbs require
replacement.
Log
Ember
bed
Front
Edge
LED Wire
Harness
7. Unscrew bulbs counter
clockwise.
8. Insert new bulbs.
9. Re-connect the logset LED
wire harness to the unit.
10. Replace the log by inserting
the rear tab of the logset
under the back ledge of the
fireplace and push down on
the front edge of the logset
until it snaps into place
(Figure 3).
11. Replace log grate using two
screws previously removed.
9