Cooper Lighting Solutions PMM Mesa Instrucciones De Instalación página 3

4. Slip fit the fixture onto the tenon. (Figure 2.)
N ote: Make sure wires do not get pinched.
5. For luminaire with asymmetric optics, rotate the fixture
according to arrow mark on the dome towards the
street side. (Figure 3.)
For standard product
6a. Install four 3/8 - 24 x .375" set screws and tighten
to 160 in-lbs. (Figure 4)
7a. Install four 3/8 - 24 x .3185" jam set screws and tighten
to 100 in-lbs. (Figure 4)
For 3G product
6b. Install eight 3/8 - 24 x .375" set screws and tighten
to 160 in-lbs. (Figure 5)
7b. Install eight 3/8 - 24 x .3185" jam set screws and
tighten to 100 in-lbs. (Figure 5)
CAUTION
Over tightening screws may cause fixture damage.
Installation Instructions – PMM / MSA Mesa
(4) Jam Screws
Figure 4.
(4) Jam Screws
Figure 5.
Cooper Lighting Solutions
IB525016EN
(4) Set Screws
(4) Set Screws
Installation instructions
3