Cooper Lighting Solutions IRIS ZLE03 Instrucciones De Instalación

ADI140846
Installation Instructions – ZLE03 LED Light Engine
Instructions d'installation – Lampe à DEL ZLE03
Instrucciones de instalación de la luz LED ZLE03 de motor
IMPORTANT: Read carefully before installing fixture. Retain for future reference.
WARNING
Risk of Electrical Shock! Disconnect power at fuse
or circuit breaker before installing or servicing.
WARNING
Use only elements provided by IRiS Lighting
Systems. Use of other manufacturer's reflectors
not classified Underwriter Laboratories listings and
CSA certification and could constitute a fire hazard.
The IRiS ZLE03 replacement kit is a Zhaga book 3 compliant LED light engine suitable for field replacement in
N otee:
the IRiS P3LED housing platform.
INSTALLATION
Removing the Old Light Engine
The old light engine is easiest to remove via top
access. To get to access, see the instructions below.
If top access is not available, the light engine can be
removed through the aperture. (Figure 1. to Figure 7 .)
Driver Assembly
Figure 1. ZLE0309XXXXE/2LE0309XXXXE010
WARNING
Risk of Fire! Supply conductors (power wires)
connecting the fixture must be rated minimum 90°C. If
uncertain, consult an electrician.
CAUTION
For your safety read and understand instructions completely
before beginning installation.
Top Access
Top access is achieved by loosening the top access thumb
screw on the housing platform and lifting or removing the
top cover. This allows for inspecting and servicing the fixture
without removal. A minimum of 12˝ clearance above the
housing is recommended to allow top access (Figure 1. to
Figure 7 .).
2 Pin Linear Disconnect
for Wire Harness
6 Pin Linear Disconnect
Wire Harness for Supply
Wires
TM
INS #
LED Module