To wall mount:
1.
Secure the bracket onto a desired wall using the screws and plastic anchors.
2.
Clip the remote thermo-hygro transmitter onto the bracket.
Note:
Before permanently fixing the transmitter wall base, place all units in the desired
locations to check that the outdoor temperature reading is receivable. In event that the
signal is not received, relocate the transmitters or move them slightly as this may help
the signal reception.
CARE AND MAINTENANCE:
Extreme temperatures, vibration and shock should be avoided as these may cause damage to the units
•
and give inaccurate forecasts and readings.
When cleaning the display and casings, use a soft damp cloth only. Do not use solvents or scouring
•
agents as they may mark the LCD and casings.
Do not submerge the units in water.
•
Immediately remove all low powered batteries to avoid leakage and damage. Replace only with new
•
batteries of the recommended type.
Do not make any repair attempts to the units. Return it to their original point of purchase for repair by a
•
qualified engineer. Opening and tampering with the units may invalidate their guarantee.
69