Technoline WS9040 Manual De Instrucciones página 69

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 119
TOGGLING AND RESETTING THE OUTDOOR DATA
To toggle between the outdoor current, MAX/MIN temperature and humidity data and the times (for
1.
temperature data only) they were recorded press the OUT/+ key:
Once to show the MAX outdoor temperature and humidity data with the recorded time and date.
Twice to show the MIN outdoor temperature and humidity data with the recorded time and date.
Three times to return to the current displayed values.
2.
Once the MIN or MAX data is displayed, press and hold the SET key for 3 seconds to reset the
respective MIN or MAX record to current temperature and humidity data, and current time, date display.
Note: The MIN or MAX data needs to be reset individually.
TO VIEW THE MIN/MAX DATA FROM DIFFERENT TRANSMITTERS
When more than 1 transmitter used:
1.
To toggle between transmitters, press the CH key:
Once to show transmitter 2
Twice to show transmitter 3
Three times to return to transmitter 1
2.
Use OUT/+ key to view the MIN/MAX temperature and humidity data for the selected transmitter.
3.
To reset the minimum and maximum temperature and humidity data, and the times at which they were
recorded, press the SET key continuously for about 3 seconds. This will reset the MIN/MAX data
recorded to the current time, date, temperature and humidity. The current time taken is the normal
displayed time and does not regard the time zone set for the unit.
65
Tabla de contenido
loading

Tabla de contenido