Care And Maintenance - Technoline WS-9215 Manual De Instrucciones

To wall mount:
1. Secure the bracket onto a desired wall using the screws and plastic
anchors.
2. Clip the remote temperature sensor onto the bracket.
Note:
Before permanently fixing the transmitter wall base, place all units in the
desired locations to check that the outdoor temperature reading is
receivable. In event that the signal is not received, relocate the
transmitter or move the units slightly as this may help the signal
reception.

CARE AND MAINTENANCE:

• Extreme temperatures, vibration and shock should be avoided as these may cause
damage to the unit and give inaccurate forecasts and readings.
• Precautions shall be taken when handling the batteries. Injuries, burns, or property
damage may be resulted if the batteries are in contact with conducting materials, heat,
corrosive materials or explosives. The batteries shall be taken out from the unit before
the product is to be stored for a long period of time.
• Immediately remove all low powered batteries to avoid leakage and damage. Replace
only with new batteries of the recommended type.
53