Safety Precautions - BGS technic 40107 Manual De Instrucciones

SAFETY PRECAUTIONS

To prevent accidents that could possibly result in serious injury and/or damage to vehicles and/or test
equipment, carefully observe all safety rules and test procedures when working on vehicles
Do not wear loose clothing or jewelry while working on engine. Loose clothing can get
caught in fan, pulleys, belts, etc. Jewelry can conduct current and can cause severe burns if
comes in contact between power source and ground.
Before working on a vehicle, set the brakes and block the wheels. Beware of automatic
parking brake releases.
When the engine is running, it produces carbon monoxide, a toxic and poisonous gas.
Always operate the vehicle in a well ventilated area. Do not breathe exhaust gases – they
are hazardous that can lead to death.
Fuel and battery vapors are highly flammable.
Do not smoke near the vehicle during testing.
When engine is running, many parts (such as pulleys, coolant fan, belts, etc) turn at high
speed. To avoid serious injury, always be alert and keep a safe distance from these parts.
Engine parts become very hot when engine is running. To prevent severe burns, avoid
contact with hot engine parts.
Never lay tools on vehicle battery. You may short the terminals together causing harm to
yourself, the tools or the battery.
c.
b.
a.
1. Timing Light
2. Adjustable Nuts: to adjust the tightness of the Piezo Clamp onto the injector pipe
3. Piezo Clamp: The Piezo Clamp equipped with a sensing element enables to detect the fuel pressure pulse in the injector fuel pipe while fuel is injected into the cylinder and the Piezo Clamp
is lamped on the #1 Injector fuel pipe.
4. Main Cable :
a. Battery Clip red to supply the Timing Light powered from the vehicle battery
b. Battery Clip black to supply the Timing Light powered from the vehicle battery
c. Test Clip (green): for RPM, Dwell, Voltage tests
d. Sensor Connector (white): to connect with Diesel sensor lead or Inductive pickup lead
5. Sensor Lead with converter box: to produce a signal to trigger the timing light
6. Inductive Pick-up Lead: to clamp onto #1 spark plug of ignition engine system
SW-Stahl und Werkzeugvertriebs GmbH
L e v e k r u s r e t S a r s s e 6 5
D 4 - 2 8 9 7 R e m s c h e d i
- 2 -
d.
Tel. +49 (0) 2191 / 46438-0
F ax +49 (0) 2191 / 46438-40
- E M a : l i n i o f @ s w s a t l h d . e