Tabla de contenido
Idiomas disponibles
Idiomas disponibles
COMPONENTS 1-5
1 Pressure gauge, 0-2000 bar
2 Measuring hoses, flexible, 500 mm, (x4)
3 Hose adaptors, M12x1.5 (x2)
3 Hose adaptors, M14x1.5 (x2)
4 Blind plugs, M12x1.5 (x6)
4 Blind plugs, M14x1.5 (x6)
5 Diesel collecting bottle
COMPONENTS A-I (PRESSURE REGULATOR DUMMY)
A
Bosch CP1
B
Bosch CP3
C
Delphi DFP1 / DFP3
D
Denso HP3
E
Denso HP1 / HP2
ATTENTION
Read the operating instructions and all safety instructions contained therein carefully before using the
product. Use the product correctly, with care and only according to the intended purpose. Non-
compliance of the safety instructions may lead to damage, personal injury and to termination of the
warranty. Keep these instructions in a safe and dry location for future reference. Enclose the
operating instructions when handing over the product to third parties.
INTENDED USE
This test tool set is made for testing the high pressure from common rail injectors of Bosch, Denso,
Delphi and Siemens. The determined pressure values allow a condition assessment of the high
pressure pump, the pressure regulator and the injectors. In conjunction with an OBD reader, the
status of the pressure sensor can also be determined.
SAFETY INFORMATIONS
• Keep children and other persons away from the working area.
• Do not allow children to play with this tool or its packaging.
• Do not use the tool if parts are missing or damaged.
• Use the tool for the intended purpose only.
• Due to the extremely high working fuel pressures in the common rail fuel system, NEVER
slacken fuel or injector pipes or try to disconnect components of the fuel system whilst the
engine is running and high pressure is present in the system!
• Avoid skin and eye contact with fuels. When you working with fuels always wear fuel-resistant
gloves and safety glasses!
• Do not work in areas where there is an open flame or fire.
• Never ignite a match or other flammable material near the engine.
• Do not smoke during inspection work on the fuel system
• When testing fuel systems, do not operate electrically powered tools or other equipment that
could cause a spark.
• Let the engine cool down before you start testing the fuel system.
• Replace leaking or cracked fuel lines and connections.
• Keep children away from the work area and never allow them to play with the tool or its
packaging.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Common Rail High Pressure Tester
Tel.: 02196 720480
Fax.: 02196 7204820
F
Siemens DCP2
G
Siemens DCP1
H
Siemens wrench
I
Siemens DCP1 / DCP2
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
BGS 62611
Tabla de contenido
