Maintenance Intervals; Table Of Maintenance Intervals; Storage; Waste Disposal And Environmental Protection - Deltafox DG-ECS 7120 T Traducción Del Manual De Instrucciones Origina

Maintenance intervals

Carry out the maintenance work listed in the table below at regular intervals. Regular
maintenance of your equipment extends the lifespan of the equipment. You will also
achieve optimum cutting performances and avoid accidents.

Table of maintenance intervals

Machine Part
whole machine
Accessible screws
and nuts
Chain wheel
Saw chain
Blade
Oil automatic sys-
tem

Storage

• Clean and maintain the device prior to
storage.
• Put on blade cover.
• Always empty the oil tank before
pauses in operation lasting several
weeks because the biological chain oil
can become resinous and block the oil
outlet channel. Dispose of used oil in
an environmentally correct manner.
• Store the device in a dry, frost-free,
and dust-protected place and out of
reach of children.
Action
Check condition, replace damaged
parts if necessary
Tighten
Check, replace if necessary
Check, oil, sharpen or replace if
necessary
Check, turn, clean, oil
check and, where appropriate,
clean oil outflow duct
Before
each use
Waste disposal and
environmental protection
Do not dispose of used oil in the sewage
system or drains. Dispose of used oil in
an environmentally correct manner - bring
it to a waste disposal center.
Be environmentally friendly. Return the
tool, accessories and packaging to a recy-
cling centre when you have finished with
them.
Machines do not belong with
domestic waste.
In accordance with the EU directive
2012/19/EU on waste electrical and elec-
tronic equipment and its implementation
After 10 oper-
ating hours




 

GB
97