Tabla de contenido
Idiomas disponibles
Idiomas disponibles
An oiling mechanism ensures continuous
chain lubrication. The equipment is fitted
with various safety functions to protect the
user.
Safety functions
2 Saw chain with limited re-
bound
Helps you to absorb rebounds
by means of specially devel-
oped safety devices.
16 Start lock
The start lock must be unlocked
in order to start the equipment.
14 On/off switch
The equipment switches off
immediately when the on/off
switch is released.
17 Claw stop
Reinforces the stability when
vertical cuts are executed and
makes sawing easier.
21 Shoulder strap
Ensures even load distribu-
tion on shoulder, back, hip and
thigh.
Technical Data
Electric pole-mounted
pruner ............................ DG-ECS 7120 T
Rated input voltage U
.................................... 230-240 V~, 50 Hz
Input power ..................................... 710 W
Safety class ........................................
Protection type...................................IPX0
Chain speed ................................10.8 m/s
Weight (with guide rail + chain) .......4.1 kg
Oiltank ............................................120 ml
Chain ......................... Trilink CL14333PB
Chain pitch ...................................... 3/8"
Chain width ............................... 1.3 mm
Number of chain drive links ............... 40
Teeth of the sprocket chain wheel .......... 6
Chain bar .............. Trilink N1430833-1041
Length of the chain bar ................ 240 mm
Sawing length (max.) ............... 195 mm
Acoustic pressure level
(L
) .....................85.4 dB(A); K
pA
Sound power level (L
measured ........... 97.0 dB(A); K
guaranteed ............................ 101 dB(A)
Vibration (a
)
h
Round handle ........2.71 m/s
Operating handle ...3,06 m/s
The specified total vibration value and the
stated noise emission value have been
measured according to a standardised
test method and can be used to compare
one power tool with another. The speci-
fied total vibration value and the stated
specified noise emission value can also
be used for a provisional assessment of
the load.
Warning: The vibration and noise
emissions may deviate from the
specified values during actual use
of the power tool, depending on
how the power tool is being used
and, in particular, what kind of ma-
terial is being worked on.
Safety measures for the protection
of the operator are to be deter-
mined that are based on an esti-
mate of the actual vibration load
under the real operating conditions
II
(for this, all parts of the operating
cycle are to be taken into account,
for example, times in which the
electric tool is turned off, and those
during which it is turned on but
running without a load).
Try to keep the exposure to vibra-
tions as low as possible. Examples
of measures to reduce vibration
GB
= 3 dB
pA
)
WA
= 3 dB
WA
; K= 1.5 m/s
2
; K= 1.5 m/s
2
2
2
85
Capítulos
Tabla de contenido
