General Use & Safety Warnings; General; Electrical Safety; Before Operating - VITO PRO-POWER VILG800 Manual De Instrucciones

EN
2. GENERAL USE &
SAFETY WARNINGS
While using electrical
several basic safety precautions
must always be followed in order to
reduce the risk of fire, electric shocks and
personal injuries.
Read and understand the manual
before start using this equipment.
Save this manual for future reference.

2.1 - GENERAL

These preventive measures
essential for your safety. Always use
the machine with care in a responsible
manner.
This machine may only be used by who
have read the instruction manual and by
who is familiar with its handling. Before
using it, the user must be instructed by
the vendor or other competent person
about its use.
This instruction manual is an integral
part of the machine and must always
be provided.
Get familiar with the equipment's
control devices and operation. The
user must know how to stop the sander
immediately.
Stay alert and use common sense while
operating an electric tool. A moment of
distraction may result in serious injury.
Use this machine only if you are in
good physical and mental conditions.
Do not use this machine if you are
tire or under the influence of alcohol,
drugs or medication. If you suffer from
any health problem, please ask your
doctor about the possibility of using the
sander.
Never allow the sander to be used by
children, people with limited physical,
sensorial or mental capabilities, with
lack of experience and knowledge of
28
this machine and who is not familiar
with the instructions.
This sander must only be used
as described in this instruction
manual. No other use is allowed
tools, besides the described.
Do not overload the power tool and use
it properly for each type of work. Using
this equipment for purposes other than
the intended and an improper use of the
accessories may result in dangerous
situations.
For safety reasons, any changes other
than the assembly of accessories
authorized by the manufacturer are
are prohibited. Any changes made void the
warranty.
You can obtain any information about
the authorized accessories through
your VITO official distributor.

2.2 - ELECTRICAL SAFETY

Do not use this machine in an
explosive environment, especially in
the presence of flammable liquids,
gases or dusts. Any power tool may
form sparks that might ignite liquids,
gases, or dust.
The supply voltage must match
the information on the nameplate of the
machine. The power cable must be
plugged into an electrical outlet with a
differential protection.
The differential switch associated with
the power circuit must be regulated to
trigger when there is a maximum fault
current of 30mA.
Do not expose any power tools to
rain or use them in wet or humid
environments. The presence of water
in an electric tool increases the risk of
damage and electric shock to the user.
Never use the power cable to pull,
carry or unplug the tool. Damaged
power cables increase the risk of
electric shock.
Keep the power cable and plug away
from heat sources, oil, sharp objects
and the rotating accessory. If the power
cable is damaged, it must be replaced
by a qualified technician; it is not
allowed to repair it.
Do not modify the power cable plug.
Use a compatible socket with the plug
of this machine. Do not use any type of
adapter.
The use of extension cords to connect
the power cable is not recommended.
However, if you use an extension, you
should take some precautions, such as:
� If using this machine outdoors,
use only suitable extension cords for
outdoor use. Using a proper extension
cord reduces de risk of electric shock.
� Use only extension cords, plugs and
sockets with ground connection;
� The extension cable section must
be proportional to the length and have
equal or higher characteristics to the
machine's power cord.
� Do not use damaged extension cords.
Check them before using and replace if
necessary.
� Always unplug the extension cord
before removing the machine's power
cable.
� When it's an extension cord reel,
unroll the entire cable.
This machine is double insulated
in accordance with EN 60745
standards. It is not required an earth
connection.

2.3 - BEFORE OPERATING

Make sure that the machine is only used
by who is familiar with the instruction
manual.