Kohler STERLING 600C Serie Guia De Instalacion página 9

Measure here.
8. Install the Top Track
Measure the distance from wall to wall above the wall jambs.
Mark the top track at the determined dimension.
NOTE: For best results use a 32-teeth per inch hacksaw and miter box.
Cut the top track on the inside edge of the mark [approximately 1/32" (1 mm) from the mark] to
allow space for the top track to slide into place easily.
Carefully file the rough edges smooth where the top track was cut, taking care to avoid damaging
finished surfaces.
9. Install the Rollers
NOTE: The 600C/610C doors come with either hammered glass panels or frosted glass panels. If the glass
panel is rough or unfrosted, the patterned side should face the outside of the shower. If the glass is
smooth or frosted, the patterned side of the glass should face the inside of the shower.
On the outside panel, attach the rollers to the top frame flange so they are on the outside of the
panel.
On the inside panel, attach the rollers to the top frame flange so they are on the inside of the panel.
Secure the rollers with #8-32 x 3/8" panhead screws.
Sterling
#8-18 x 3/8"
9
Front
Panel
Slot
Roller
Screw
Back
Panel
1034040-2-B