GRAPHITE 58G950 Instrucciones De Uso página 23

Never start or guide a cut with the tip of the guide bar!
Always start cutting with saw previously switched on!
Ensure the cutting chain is sharp.
Never cut more than one branch at a time. When cutting off, watch out for surrounding branches. When
cutting a tree through, watch out for nearby tree trunks.
CAUTION! The design is assumed to be safe, protection measures and additional safety systems are
used, nevertheless there is always a small risk of operational injuries.
EXPLANATION OF USED SYMBOLS
1. Caution, use precaution measures
2. Fire hazard
3. Exhaust gas poisoning hazard
4. Use protective gloves
5. Switch off the engine and remove wire from the ignition plug before commencing any maintenance
or repair
6. Read instruction manual, observe warnings and safety conditions therein!
7. Use head, eyes and ears protection
8. Danger of recoil
9. Use protective clothes
10. Use protective shoes
11. Do not put your hands or legs close to cutting parts
CONSTRUCTION AND USE
Petrol chain saw is a hand-held tool. It is driven by an air cooled, two-stroke combustion engine. Tool of this
type is designed for tasks in home garden. The saw can be used for cutting down trees, cutting branches,
firewood, wood for fireplace and other tasks where cutting wood is necessary.
Use the device according to the manufacturer's instructions only.
DESCRIPTION OF DRAWING PAGES
Below enumeration refers to the device elements depicted on the drawing pages of this manual.
1. Throttle lever lock
2. Choke cable
3. Knob for air filter lid
4. Air filter lid
5. Front handle
6. Brake lever
7. Guide bar fixing nuts
8. Chain tension adjustment screw
9. Oil feed adjustment screw
10. Casing
11. Throttle lever
12. Main handle
13. Starter line
14. Ignition switch
23