Removing Your Mask - ResMed Quattro FX NV Guia Del Usuario

Removing your mask

To remove your mask, disconnect the lower headgear clips and pull the mask
and headgear up over your head.
Disassembly
Before disassembling your mask, detach the air tubing and unclip the lower
headgear clips from the spring frame. Refer to the disassembly illustrations in
this guide.
Disassembly steps
1. Remove the elbow from the mask.
2. Gently pull the spring frame away from the frame. Remove the soft
sleeves from the spring frame.
3. Gently separate the cushion from the frame.
4. Remove the ports cap.
Reassembly
Refer to the reassembly illustrations in this guide.
Reassembly steps
1. Replace the ports cap.
2. Fit the cushion into the channel of the frame. Fit the top section first,
then work your way around, pushing the cushion into the frame.
Ensure that the cushion is not twisted or distorted around the frame.
3 Replace the soft sleeves onto the spring frame and align the spring
frame with the frame.
4. Starting at the top, gently push and click the spring frame into the
frame.
5. Gently push and click each side of the lower spring frame into the
frame.
6. Replace the elbow into the mask assembly.
3