Ryobi ACSS01 Guia De Inicio Rapido
Ryobi ACSS01 Guia De Inicio Rapido

Ryobi ACSS01 Guia De Inicio Rapido

Hoja de cizalla recortadora de césped/cortador de arbustos

Enlaces rápidos

These replacement blades are for use with RYOBI Grass Shear/Shrubbers ONLY.
WARNING!
To reduce the risk of injury, user must read and understand the operator's
manual for their grass shear/shrubber. and this instruction sheet. Always wear
eye protection with side shields marked to comply with ANSI Z87.1. Ensure
compatibility and fit before using this accessory. Do not use this accessory
if a part is damaged or missing. If you are not comfortable performing any
of the functions described in these instructions, take your unit to a qualified
service center.
WARNING:
To avoid serious personal injury, always remove the battery pack from the tool
when performing any maintenance.
WARNING:
Always protect hands by wearing heavy gloves and/or wrapping the cut-
ting edges of the blade with rags and other material when performing blade
maintenance. Contact with the blade could result in serious personal injury.
INSTALLING THE GRASS SHEAR BLADE
See Figure 1.
 Remove the battery pack, if installed.
 Unscrew the lock knob and remove the attached blade from the tool.
 Install the blade onto the bar stud and secure it in place using the lock
knob.
NOTE: Only use grass shear blade for trimming grass and other light weeds.
INSTALLING THE SHRUBBER BLADE
See Figure 2.
 Remove the battery pack, if installed.
 Unscrew the lock knob and remove the attached blade from the tool.
 Install the blade onto the bar stud and secure it in place using the lock
knob.
WARNING:
Ensure blade is properly seated and the blade bolt is tightened. Failure to
properly attach the blade could cause it to come loose or detach and result
in possible serious personal injury.
WARNING:
Only use replacement blades and blade hardware authorized by the
manufacturer of your grass shear/shrubber. Unauthorized blades and/or blade
hardware could break, allowing the blade to come loose, resulting in possible
serious personal injury and damage to the grass shear/shrubber.
TECHTRONIC INDUSTRIES POWER EQUIPMENT
P.O. Box 1288, Anderson, SC 29622 USA  1-800-525-2579  www.ryobitools.com
GRASS SHEAR/
SHRUBBER BLADES
ACSS01
Fig. 1
A
A - Lock knob (bouton de verrouillage, perilla de
fijación)
B - Shear blade (lame pour cisailles, hoja de la cizalla)
C - Bar stud (goujon de guide, perno de la barra)
Fig. 2
A
A - Shrubber blade (lame pour arbustes, hoja del
cortador de arbustos)
B - Lock knob (bouton de verrouillage, perilla de
fijación)
C - Bar stud (goujon de guide, perno de la barra)
B
C
B
C
loading

Resumen de contenidos para Ryobi ACSS01

  • Página 1 GRASS SHEAR/ SHRUBBER BLADES ACSS01 These replacement blades are for use with RYOBI Grass Shear/Shrubbers ONLY. Fig. 1 WARNING! To reduce the risk of injury, user must read and understand the operator’s manual for their grass shear/shrubber. and this instruction sheet. Always wear eye protection with side shields marked to comply with ANSI Z87.1.
  • Página 2 Ces lames de rechange doit être utilisée avec les cisailles à gazon/arbustes de RYOBI seulement. Estas cuchillas de repuesto debe usarse SOLAMENTE con cizalla recortadora de césped/cortador de arbustos de RYOBI. AVERTISSEMENT ! Pour réduire les risques de blessures, l’utilisateur doit lire et veiller ¡ADVERTENCIA!