Technical Data; Intended Use; Safety Notes - Bosch Rexroth SMpdp Manual Del Usuario

8/32 Bosch Rexroth AG | Electric Drives and Controls

1 Technical Data

1 Technical Data
Designation
Order number
Admissible ambient temperature
Admissible relative humidity when in operation
Admissible storage temperature
Admissible relative storage humidity
System of protection
Dimensions board (w x h x d)
Weight
Table 1:
Subject to alteration
2

Intended use

The SMpdp interface module is intended for
installation in the KE300 Communication
Unit. A tightening system is controlled via this
interface. It enables the cyclic data inter-
change with Profibus DP in accordance with
EN 50 170. The following data rates (Baud
rates in kbit/s) are supported: 9.6. 19.2;
93.75; 187.5; 500; 1,500; 3,000; 6,000;
12,000.
SMpdp | 3 609 929 724/1.2
SMpdp
0 608 830 165
0 up to 55 °C with ventilator
20 - 90 % non-condensing
– 20 °C up to 70 °C
20 - 95 %
IP 20 when installed
24 mm x 81mm x 207 mm
0.15 kg
3

Safety Notes

Please keep this Technical Information in a
place easily accessible for all users.
The Technical Information is intended for
specially trained personnel who have special
knowledge of this machine's hardware com-
ponents.
Repairs or other operations on the hard or
software of our products, if they are not de-
scribed within these instructions, may only be
carried out by Rexroth experts. Unqualified
repairs or operations on the hard or software
or the failure to observe the warnings within
these instructions or warnings placed on the
product itself could lead to personal damage
or damage to property.