Guarantee; Complaints And Repairs; Service; Distribution - Bosch Rexroth SMpdp Manual Del Usuario

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 20
3 609 929 724/1.2 | SMpdp

6 Guarantee

5.2
Switching-On
After switching on, the module starts in offline
mode, expects the parameterization telegram
and following successful parameterization,
the configuration telegram. Following suc-
cessful configuration, the mo-dule switches
into online mode and is ready for data inter-
change.
If the module does not switch to online mode,
an error has been made during para-meteri-
zation or configuration. The error can be eva-
luated via standard diagnostic requirements
by the Profibus-Master.
Further PDP errors can be read out with the
BS300 Operating System.
5.3
Master Data (RB000134.GSD)
The required master data files are necessary
for projecting included on the diskette. In the
case of loss or damage this can be retrieved
from the Internet at the following address:
http://www.profibus.com
5.4
Profibus services of SMpdp
The following services are supported by
SMpdp for cyclic data traffic:

Service

Meaning
Access
Point
Default-SAP Data interchange
(Write_Read_Data)
SAP56
Read inputs (Rd_Inp)
SAP57
Read outputs (Rd_Out)
SAP59
Read configuration data
(Get_Cfg)
SAP60
Read diagnostic information
(Slave_Diagnosis)
Standard diagnostic data
SAP61
Send parameterization data
(Set_Prm)
SAP62
Check configuration data
(Chk_Cfg))
Table 3:
Electric Drives and Controls | Bosch Rexroth AG 11/32
6
Guarantee
We grant a 1-year-warranty for Rexroth ma-
chines (invoice or delivery note serves as
proof).
Damage attributable to normal wear and tear,
overload or improper handling will be exclu-
ded from the guarantee.
7

Complaints and repairs

For complaints and repairs that require disas-
sembly, please send the interface module fully
assembled to the supplier or our customer
service workshop in Murrhardt, Germany.
Complaints and repairs cannot be acknow-
ledged if this procedure is not followed.
8
Service
Bosch Rexroth AG
Competence Center Murrhardt
Service Schraub- und Einpress-Systeme
Fornsbacherstr. 92
71540 Murrhardt, Germany
Tel.: +49 (0)7192 22 231
Fax: +49 (0)7192 22 164
9

Distribution

Bosch Rexroth AG
Electric Drives and Controls
Schraub- und Einpress-Systeme
Postfach 1161
71534 Murrhardt, Germany
Fax +49 (0)71 92 22-1 81
http://www.boschrexroth.com/schraubtechnik
Tabla de contenido
loading

Este manual también es adecuado para:

3 609 929 724

Tabla de contenido