Silvercrest SFPW 360 B1 Manual De Instrucciones página 21

Permanent projection
For permanent projection, the power adapter must be
connected to a power supply (see section Connect-
ing to a power supply) .
♦ Set the On/Off switch for permanent projection 0
to the position ON to switch on the projection .
♦ Set the On/Off switch for permanent projection 0
to the position OFF to switch off the projection .
Rotating the projection
♦ Press repeatedly the ROTATION TIME/TEMP
button 4 to rotate the time/temperature projection
by 90°-steps .
Focussing the projection
♦ Turn the FOCUS dial z on the rear of the projec-
tion arm 3 to focus the projection .
Switching the projection between time and
temperature
♦ Touch the
projection .
♦ While the projection is on, press
the ROTATION TIME/TEMP button 4 for
around 3 seconds . The projection switches
between time and temperature .
SFPW 360 B1
_330014_SFPW360B1_LB9.indb 21
button 1 to switch on the
│
21
US - EN
■
03.09.19 12:2