Levolor Real Wood & Faux Wood Blinds Instalación página 13

OUTSIDE MOUNT (OM)
Drywall
Anchor
STEP 2: INSTALLING THE BRACKETS
IMPORTANT: Use drywall anchors when mounting into drywall (not provided).
IMPORTANT: The rear of the brackets must be flush against a flat mounting surface.
Do NOT mount brackets on curved molding.
•
Drill pilot holes using a
•
While holding the brackets in place, secure the brackets using two screws
per bracket.
•
Use a level to ensure all brackets are even and square with each other.
CAUTION: Do not use more than one spacer block. Using more than one
!
spacer block could cause blind to fall resulting in possible injury.
Center support
bracket(s)
(if included)
⁄ " drill bit using pencil marks as a guide.
1
16
Screws
(2 per bracket)
Corded & Cordless Operation
INSTALLATION
Box
bracket
13