Startup; Operation - AL-KO EKS 2000/35 Instrucciones De Uso

en
DANGER!
Danger of fatal injury due to negligence!
This can result in extremely serious inju-
ries!
The purpose of the chain brake is to re-
duce or avoid injury in the event of pos-
sible kickback.
Pay attention to safety and work with a
high level of concentration when using
the chain saw.
Saw chain oil
Each time before starting work, check
the oil level and replenish saw chain oil
if necessary.
The saw chain and the chain bar are continuously
supplied with oil during operation by means of an
automatic oiler system. The saw chain oil protects
against corrosion and premature wear.
To lubricate the saw chain and the chain bar,
only use environmentally friendly, biodegradable,
high-quality saw chain oil. This oil must be trans-
ported and stored in approved and appropriately
labelled containers.
There must always be sufficient saw chain oil in
the tank (11/1), (12/1) to lubricate the saw chain
sufficiently. The oil level can be checked in the
viewing aperture. The level must not be below the
"MIN" marking (11/3), (12/3) or above the "MAX"
marking (11/2), (12/2).
CAUTION!
Machine damage by using used oil!
Using used oil can lead to machine da-
mage, and is harmful to the environment!
CAUTION!
Machine damage due to gumming of the
saw chain oil!
Gumming of the saw chain oil can lead to
damage to oil-channelling components
or the oil pump!
Remove the saw chain oil from the ma-
chine before each extended period of
storage.
34

STARTUP

DANGER!
Danger of injury from damaged compo-
nents!
Damaged components can lead to se-
rious and even fatal injuries!
Before taking into operation, carry out a
visual inspection and check the compo-
nents for function.
DANGER!
Danger of fatal injury if the chain brake
is damaged!
This can lead to extremely serious and
even fatal injuries!
Check the function of the chain brake
each time before starting work.
Each time before starting work, check
the oil level and replenish saw chain oil
if necessary.
Comply with working time regulations in force
in your country.
Grip the rear saw grip firmly with your right
hand (right-handed operator) and the front
grip with your left hand, and hold them tightly.
Do not release the grips for as long as the
motor is running.
Before taking the chain saw into operation,
hook the extension cable into strain relief
(13).
Do not use the saw if you are:
Tired
Unwell
Under the influence of alcohol, medici-
nes and drugs

OPERATION

Switching on the motor
Release the chain brake each time be-
fore switching on the chain saw.
1. Press and hold locking button (14/1) with your
thumb.
2. Press and hold on/off switch (14/2).
EKS 2000/35 / EKI 2200/40 / EKS 2400/40
Assembly