Bang & Olufsen BeoVision 12 Manual Del Usuario página 10

10
Wall bracket and TV dimensions
Use the correct size and type of screws and wall
anchors – taking into account the construction
and condition of the wall. Use six round-headed
screws and wall anchors, three in each side – each
screw with a minimum load rating of 30 kg
(66 lbs).
Ventilation
To ensure proper ventilation, allow at least 10 cm
(4") of space at the top, bottom and sides. Do not
cover the ventilation holes on the rear, as this may
cause the TV to overheat.
Information
Special notice about light partition walls
Mounting the wall bracket
The wall bracket must be mounted by qualified Bang & Olufsen personnel. Follow the
guidelines for mounting the TV on the wall bracket on this and the following page.
50 mm
1.96"
505 mm
19.88"
163 mm
6.42"
576 mm
22.68"
225 mm
8.86"
If you intend to hang the BeoVision on a gypsum wall (also known as drywall or wallboard), the wall
bracket must be fastened to a vertical stud. Use six round-headed screws (ø 6 mm, 0.24"), three in each
side of the wall bracket. Two screws must penetrate the gypsum and be screwed a minimum of 65 mm
(2.5") into a vertical stud.
300 mm 300 mm
11.81" 11.81"
1 2
331 mm 775 mm
13.03" 30.51"
1610 mm
63.39"
505 mm
19.88"
801 mm
31.54"
Front view