Fein ASte 638 Manual De Instrucciones página 12

ASt/e 638 - (069) - Buch Seite 12 Freitag, 7. November 2003 12:37 12
EN
Turning the shoe plate (7).
!
Risk of injury
by switching the tool ON unintentionally.
Before changing the tool, pull out the mains
plug.
Working with metal:
The saw blade is inserted through the slit
on the shoe plate (7g).
Working with wood:
For ensuring a clean cutting edge, the saw
blade is inserted through the anti-chipping
protector (7f).
When working with metal do not use the anti-chipping protector (7f), as the metal
chippings will damage it.
Undo screw (7e) and remove the shoe
plate.
Turn the shoe plate through 180° and
fasten using screw (7e).
Press the anti-shipping protector (7f) in
so that the saw blade does not contact
the anti-chipping protector.
Cleaning and care.
!
Risk of injury
by switching the tool ON unintentionally.
Before cleaning, pull out the mains plug.
Carry out the following once a week, or
more often if the power tool is used more
frequently:
Clean the venting openings.
Blow out the motor space from outside
with dry compressed air.
12
ASte 638 / ASt 638
Maintenance and repairs.
!
Risk of injury
Service, testing and repairs may only be car-
ried out by electrical engineers in conformity
with the regulations valid in the respective
country.
Maintenance and repairs.
We recommend our customer service
department (repair centre), FEIN author-
ised service centres and agencies.
Addresses can be found at the end of
these operating instructions and in the
enclosed safety instructions.
Please hand these operating instructions
to the repair centre. An overview of spare
parts can be found at the end of these
operating instructions.
Only use original FEIN spare parts.
Spare parts.
The overview of spare parts is at the end
of these operating instructions. Quoting
the parts no. (1), reference no. (2) as well
as the number of spare parts (3) facilitates
the ordering procedure.